Boiled Potatoes Recipe 1

Instructions

1. When about to boil potatoes, pick them out as nearly as possible of one size, or the large ones will be hard when the small ones are reduced to pulp.
2. If this cannot easily be done, cut them to one size.
3. Wash them well, remove the specks or eyes, and pare them as thinly as possible, to avoid waste.
4. As they are pared, throw them into cold water, and let them remain in it until wanted.
5. Put them into a saucepan with barely enough cold water to cover them, and as soon as the water boils throw in a little more cold water.
6. This will check the heat, and keep the potatoes from breaking before they are done through.
7. Thrust a fork into them occasionally; and as soon as they are soft take them up, pour off the liquor, and let them stand by the side of the fire with the saucepan partially uncovered till the moisture has evaporated and they are quite dry.
8. If they are allowed to remain in the water after they are done enough, they will become soggy.
9. Serve very hot.
10. When potatoes are done before they are wanted, they should be drained and left in the saucepan by the side of the fire, and instead of the lid a folded cloth should be laid over them.
11. This will absorb the moisture and keep them hot and in good condition for some time.
12. In order to make boiled potatoes look floury, boil and drain them as above, and whilst they are drying by the side of the fire shake the saucepan vigorously every minute or two.